Table of Contents

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions and Abbreviations
  3.1 Definitions
  3.2 Abbreviations
4 General test conditions
  4.1 Test conditions
  4.2 Arrangements for test signals at the input of
      the transmitter
  4.3 Arrangements for test signals at the output of
      the transmitter
  4.4 Arrangements for test signals at the input of
      the receiver
  4.5 Arrangements for test signals at the output of
      the receiver
  4.6 Receiver and receivers of transceiver exclusion
      band
  4.7 Transmitter exclusion band
  4.8 Narrow band responses of stand alone receivers
      or receivers which are part of a transceiver
5 Performance assessment
  5.1 General
  5.2 Equipment which can provide a communications
      link
  5.3 Equipment which does not provide a
      communications link
  5.4 Pass or fail criteria
  5.5 Equipment classification
  5.6 Ancillary equipment
6 Performance criteria
  6.1 General performance criteria
  6.2 Performance criteria for equipment capable of
      establishing a communications link
  6.3 Performance criteria for equipment that is not
      capable of establishing a communications link
  6.4 Performance criteria for Continuous phenomena
      applied to Transmitter (CT)
  6.5 Performance criteria for Transient phenomena
      applied to Transmitters (TT)
  6.6 Performance criteria for Continuous phenomena
      applied to Receivers (CR)
  6.7 Performance criteria for Transient phenomena
      applied to Receivers (TR)
7 Applicability overview tables
  7.1 Emission
  7.2 Immunity
8 Test methods for emission tests of transmitters
  and/or receivers and/or ancillary equipment
  8.1 Test configuration
  8.2 Enclosure - ancillary equipment
  8.3 DC power input/output port
  8.4 AC mains power input/output port
9 Test methods for immunity tests of transmitters
  and/or receivers and/or ancillary equipment
  9.1 Test configuration
  9.2 Radio frequency electromagnetic field (80 to
      1000 MHz)
  9.3 Electrostatic discharge
  9.4 Fast transients common mode
  9.5 RF common mode, 0.15 MHz to 80 MHz (current
      clamp injection)
  9.6 Transients and surges, vehicular environment
  9.7 Voltage dips and interruptions
  9.8 Transients common and differential mode
Annex A (normative): EUT test configuration
        requirements
  A.1 General
  A.2 Audio excitation
History

Abstract

Describes the EMC standard for wireless microphones - suitable for use in demonstration of compliance with EMC Directive 89/336/EEC requirements

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	European Telecommunications Standards Institute
Pages
ISBN
Committee	RES 9
Supersedes	PRETS 300 445 : A1 96