Table of Contents

1 General
    1.1 Scope
    1.2 Application
2 Applicable Documents
3 Definitions
    3.1 Terms
          3.1.1 Sensitometric Terms
          3.1.2 Physical Terms
4 Materials and Their Characteristics
    4.1 General
    4.2 Film
    4.3 Safety Base
    4.4 Antihalation Protection
    4.5 Tensile Strength
    4.6 Film Width
    4.7 Film Thickness
    4.8 Thermal Coefficient of Expansion
    4.9 Hygroscophic Coefficient of Expansion
    4.10 Permanent Change in Linear Dimension
    4.11 Photographic Characteristics
          4.11.1 Reduction
          4.11.2 Reduction Displacement
          4.11.3 Base Plus Fog Density
          4.11.4 Color Density/Saturation
          4.11.5 Plotting the Characteristic Curve
          4.11.6 Determination of Average Gradient of
                  a Tone Reproduction Curve
          4.11.7 Screen Reproduction
          4.11.8 Color/Gray Scale Guides
    4.12 Protective Coating
    4.13 Physical Defects
5 Test Equipment and Techniques
    5.1 General
          5.1.1 Densitometer
          5.1.2 Dimensional Change Gauge
          5.1.3 Constant Humidity Chamber
          5.1.4 Color Resolution
6 Quality Tests
    6.1 General Description
          6.1.1 Dimensional Change Characteristics
                  of Color Film
          6.1.2 Brittleness Test
          6.1.3 Curl Test
          6.1.4 Thermal Coefficient of Expansion Test
          6.1.5 Film Chip Edges
7 Film Chip Transparency Format
    7.1 General
    7.2 Format
Figures
1 - Tone Reproduction Curve
2 - Test Transparency Standard
3 - 105 MM Transparency Standard
4 - 70 MM Transparency Standard
5 - 35 MM Transparency Standard
Tables
I - Film Widths
II - Film Thickness

Abstract

Gives general requirements for the preparation and production of multicolor microchart/map transparencies to be used with optical projection viewing devices. Specifies the physical and photographic characteristics of the output transparencies. These transparencies shall exhibit sufficient fidelity so that when projected back to the original size, the projected image shall be an acceptable facsimile of the original chart.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	SAE International
Pages
ISBN
Supersedes	MIL STD 1347 : A